1、 TCM 3000S usage:
This analyzer is an all-in-one touch screen cutting and grinding instrument: automatic cutting and grinding. Cutting and grinding time: 15-300 seconds, with a wire diameter range of 0.008-120mm2. This system is suitable for metallographic cross-section analysis and testing requirements in fields such as the automotive industry, home appliance industry, and electronics industry.
2、 System Characteristics
1. No resin solidification required
Previously, resin solidification and hardening cutting; Then rough grinding, polishing, time-consuming and laborious, making a sample takes several hours. Now this product does not require resin solidification, making a small sample can be completed in about 3 minutes.
2. Fully automatic cutting and grinding integrated machine
This cutting, grinding and polishing integrated machine integrates a video measurement microscope, which can be cut separately, ground and polished separately, or fully automatic cutting, grinding and polishing. There is also a "learning mode", which can be operated by looking at pictures (exclusive to the industry); Even customized parameters can be set by customers for personalized cutting and polishing, as long as it can be clamped, it is not a problem; Visualize the cutting position, set the cutting position arbitrarily, with a positioning accuracy of less than 5um, without damage to cutting and polishing.
3. Cutting and grinding machine table with 7-inch touch screen cross-section, dual language Chinese and English, pressure free operation
Terminal specialized fixtures can correspond to various sizes of terminals
Exquisite stainless steel material fixture (aluminum material from other countries, easy to wear), fine tooth clamping, a good assistant for precision cutting, to prevent corrosion
3、 System Structure and Configuration
1. Siemens high-power precision cutting motor; Siemens precision grinding and lifting motors;
2. Color high-definition 7-inch touch screen
3. Misumi ball screw from Japan and silver slide from Taiwan;
4. Panasonic servo motor in Japan;
5. Applicable range: 0-20mm
6. Power supply: AC100V~AC240V, power: 350W (excluding computer)
7. Cutting blade specifications: Φ 125X0.5mm
8. Grinding sandpaper: 2000#
9. Standard calibration ruler 0.1/10mm
